Gyro-Chirality Effect of Bianisotropic Substrate On the operational of Rectangular Microstrip Patch Antenna

yesIn this paper, the gyrotropic bi-anisotropy of the chiral medium in substrate constitutive parameters (ξc and ηc) of a rectangular microstrip patch antenna is introduced in order to observe its effects on the complex resonant frequency, half-power bandwidth and input impedance. Numerical calculations and analysis based on the dominant mode are carried out to show that the latter is directly related to the former. This paper is based on the Moment Method as full-wave spectral domain approach using sinusoidal basis functions. Two new results, namely the appearance of the difference (ξc-ηc) and sum (ξc+ηc) of the two magneto-electric elements are obtained in the electric transverse components and Green tensor expressions, respectively. These new results can be considered as a generalisation form of the previously published work

Horn Antennas Loaded with Metamaterial for UWB Applications

YesIn this paper, a conical horn antenna has been designed for Ultra-Wideband ap-plications by loading its section with a metamaterial. The work aims first to compare results obtained by the wavelet-moment method to a simulation performed using HFSS. Secondly the conical horn is loaded with a very thin layer of metamaterial to enhance the radiation pattern and the bandwidth performance of the conical horn antenna and reduce the size of the antenna. The operating bandwidth of the proposed antenna is in the range of 10{13 GHz. The results obtained from HFSS and moment method are in good agreement.Electronics and Telecommunication

Theoretical Study of the Input Impedance and Electromagnetic Field Distribution of a Dipole Antenna Printed on an Electrical/Magnetic Uniaxial Anisotropic Substrate

The present work considers the investigation of the effects of both electrical and magnetic uniaxial anisotropies on the input impedance, resonant length, and fields distribution of a dipole printed on an anisotropic grounded substrate. In this study, the associated integral equation, based on the derivation of the Green's functions in the spectral domain, is numerically solved employing the method of moments. In order to validate the computing method and the evaluated calculation code, numerical results are compared with available data in the literature treating particular cases of electrical uniaxial anisotropy; reasonable agreements are reported. Novel results of the magnetic uniaxial anisotropy effects on the input impedance and the evaluated electromagnetic field are presented and discussed. This work will serve as a stepping stone for further works for a better understanding of the electromagnetic field behavior in complex anisotropic and bi-anisotropic media

Offset Aperture-Coupled Double-Cylinder Dielectric Resonator Antenna with Extended Wideband

YesA compact dielectric resonator antenna for ultra-wideband vehicular communication applications is proposed. Two cylindrical dielectric resonators are asymmetrically located with respect to the center of an offset rectangular coupling aperture, through which they are fed. Optimizing the design parameters results in an impedance bandwidth of 21%, covering the range from 5.9 to 7.32 GHz in the lower-band and a 53% relative bandwidth from 8.72 to 15 GHz in the upper-band. The maximum achieved gain is 12 dBi. Design details of the proposed antenna and the results of both simulations and experiment are presented and discussed

Low-profile and closely spaced four-element mimo antenna for wireless body area networks

A compact four-element multiple-input multiple output (MIMO) antenna is proposed for medical applications operating at a 2.4 GHz ISM band. The proposed MIMO design occupies an overall volume of 26 mm × 26 mm × 0.8 mm. This antenna exhibits a good impedance matching at the operating frequency of the ISM band, whose performance attributes include: isolation around 25 dB, envelope correlation coefficient (ECC) less than 0.02, average channel capacity loss (CCL) less than 0.3 bits/s/Hz and diversity gain (DG) of around 10 dB. The average peak realized gain of the four-element MIMO antenna is 2.4 dBi with more than 77 % radiation efficiency at the frequency of interest (ISM 2.4 GHz). The compact volume and adequate bandwidth, as well as the good achieved gain, make this antenna a strong candidate for bio-medical wearable applications

Impedance Bandwidth Improvement of a Planar Antenna Based on Metamaterial-Inspired T-Matching Network

In this paper a metamaterial-inspired T-matching network is directly imbedded inside the feedline of a microstrip antenna to realize optimum power transfer between the front-end of an RF wireless transceiver and the antenna. The proposed T-matching network, which is composed of an arrangement of series capacitor, shunt inductor, series capacitor, exhibits left-handed metamaterial characteristics. The matching network is first theoretically modelled to gain insight of its limitations. It was then implemented directly in the 50-Ω feedline to a standard circular patch antenna, which is an unconventional methodology. The antenna’s performance was verified through measurements. With the proposed technique there is 2.7 dBi improvement in the antenna’s radiation gain and 12% increase in the efficiency at the center frequency, and this is achieved over a significantly wider frequency range by a factor of approximately twenty. Moreover, there is good correlation between the theoretical model, method of moments simulation, and the measurement results

Wireless Electromagnetic Radiation Assessment Based on the Specific Absorption Rate (SAR): A Review Case Study

Employing Electromagnetic Fields (EMFs) in new wireless communication and sensing technologies has substantially increased the level of human exposure to EMF waves. This paper presents a useful insight into the interaction of electromagnetic fields with biological media that is defined by the heat generation due to induced currents and dielectric loss. The Specific Absorption Rate (SAR) defines the heating amount in a biological medium that is irradiated by an electromagnetic field value. The paper reviews the radio frequency hazards due to the SAR based on various safety standards and organisations, including a detailed investigation of previously published work in terms of modelling and measurements. It also summarizes the most common techniques utilised between 1978 and 2021, in terms of the operational frequency spectrum, bandwidth, and SAR values